|
Open icy and install from icy these apps :coreutils, grep, findutils, tape archiv, and then
- Add new repo in Icy by opening icy >>>sources >>> edit >>>> (+) thats add >>> popuup and click add and add this repo : cydia.hackulo.us
- After refreshing Icy go to categories and search for INSTALLIOUS
- Install installious and after that you can Place .ipa in /var/mobile/library/downloads/ via SSH or just search installious for .ipa you want to download download them with installious
- If there is no Downloads folder make one folder named as Downloads and set the permission to 777 and if there is then set the permission to 777
BECAREFUL with Run and install "libusb-win32-filter-bin-0.1.12.1.exe is only for XP and not VISTa or windows 7 ONLY use it in XP !!!!
now follow the following steps :
1. Start your iTunes and connect iPhone with itunes
2. Switch of your iPhone and put it in DFU mode with following instructions:
Click the Home + Power On button for 10 seconds exactly
Release the power button and continue to click on Home
3. DFU message will be displayed in iTunes Click on “OK”
4. Now Press ALT(mac) or SHIFT(windows) key on keyboard and click on Restore button on iTunes
6. A Confirmation message will be displayer. Click on Restore
7. A Restore Process will start. At the end of restore process following error message “Unknown error occurred (1015)” will be displayed.
8. Do not panic with above error message. You just need to ignore above error message and click on OK button
9. Download iRecovery for Mac and Windows (see the attachment ) !!!
10. Extract iRecovery and put iRecovery to desktop
11. Go to terminal on Mac and on Command prompt on Windows and type following command
cd Desktop
iRecovery -s
12. Once you see a Message entering in Recovery Mode, Starting command prompt on screen type following command
Fsboot
13 Once the iPhone 3GS has been restarted, you see the “Emergency calls only” and You need to reactivate tour iPhone 3GS via iTunes
14. Either you can restore a backup or configure your iPhone as new phone and you are back to iDevice 3.0 Firmware.
if Command Prompt or terminal doesnot find some file then do the following and first drag and drop all files to desktop :
Type the following command in Mac terminal application :
cd /usr
sudo mkdir local
cd /usr/local
sudo mkdir lib
cd /usr/local/lib
sudo cp /users/YOURNAME/desktop/libusb-0.1.4.dylib .
sudo chmod 755 libusb-0.1.4.dylib
cd /users/YOURNAME/desktop
./iRecovery -s
fsboot
For windows PC users open command control or search in vista for cmd and follow the following steps :
cd Desktop
iReovery
irecovery_SVN
iRecovery -s
fsboot
Downgrade iPhone 3G Baseband from 4.26 to 2.28 for OS 3.0 only :
StealthBravo Moderator at MMI posted a most awaited downgrade guide for the peoples who acidently upgrades their iPhone 3G to OS 3.0 The exploit is based on same as GeoHot discovered to downgrade from 02.30.03 to 02.28.00 . The 3G Baseband Downgrade just works on iPhones 3G with Bootloader 5.8 remember you have bootloader 5.8 not 5.9. You can check your bootloader by following this guide here. StealthBravo developed two BB Downgrade patches named “StealthBravoBBDowngrade“. First patch is developed for downgrading baseband from 4.26 to 2.28 and Second one is developed for downgrading baseband from 4.26 to 4.22 StealthBravo Also posted step by step guide which are given below. First Guide explains how to downgrade baseband from 4.26 to 2.28 so that you can unlock your iPhone 3G 2.2.1 again with Yellowsn0w 0.9.8 and the second guide is for the peoples who are using Sim Adapter Cloning to unlock the iPhone OS 3.0 beta as the beta 4 upgrades your baseband to 4.26 and most of Sim Clones works up to Baseband 4.24 so we have another guide To Downgrade your baseband from 4.26 to 4.22:
1. Make sure you are running firmware 2.2.1 and jailbroken with OpenSSH installed.
2. Launch Cydia or Icy and Install 3G Baseband Downgrade (BigBoss Repo)
3. Download the BB Downgrade Patch: StealthBravoBBDowngrade .
4. Copy the fls and eep file from 4.26 folder in the Downloaded BB Patch into /Applications/3GBBD on the phone. Overwrite the current files
5. On the phone run 3GBBD on the springboard and hit go
6. This will take a minute or two
7. When complete it should give you a green screen that says successful
8. DO NOT CLICK GO AGAIN!
9. Press the home button and then reboot your phone
10. When your phone comes back, Goto settings -> general -> about and verify you are on 2.28
You now can now run yellowsnow to unlock your phone again.
==================================================
To Downgrade your baseband from 4.26 to 4.22:
1. Make sure you are running firmware 3.0 and jailbroken with OpenSSH installed.
2. Launch Icy and Install 3G Baseband Downgrade (BigBoss Repo)
3. Download the BB Downgrade Patch: From HERE .
4. Copy the BBUpdaterExtreme into /Applications/3GBBD on the phone. Overwrite the current file
5. Check the permissions for BBUpdaterExtreme and make sure they are set to 777
6. Copy the fls and eep file from 4.26 folder in the Downloaded BB Patch into /Applications/3GBBD on the
2.
phone. Overwrite the current files
7. On the phone run 3GBBD on the springboard and hit go
8. This will take a minute or two
9. When complete it should give you a green screen that says successful
10. DO NOT CLICK GO AGAIN!
11. Press the home button and then reboot your phone
12. When your phone comes back, Goto settings -> general -> about and verify you are on 2.28
13. Copy the fls and eep file from 4.22 folder in the Downloaded BB Patch into /Applications/3GBBD on the phone. Overwrite the current files
14. On the phone run 3GBBD on the springboard and hit go
15. This will take a minute or two
16. When complete it should give you a green screen that says successful
17. DO NOT CLICK GO AGAIN!
18. Press the home button and then reboot your phone
19. When your phone comes back, Goto settings -> general -> about and verify you are on 4.22
20. You can now insert your sim adapter into your phone and you should have service!
Enable tetherig and MMS on iPhone :
The method does not require that you use iTune to hack anything or jailbreak the phone but simply visit a website and download a settings file to update the device.
Thanks to Richard Laithere is a simple guide.
- Visit http://help.benm.at/help.phpfrom your iPhone 3.0 / 3.1 device
- You will see the following screen, select "MobileConfigs"
- Next, select your provider and download the settings pack:
Enable MMS and Tethering in iPhone OS 3.0 :
Step 1 : Download the right carrier .ipcc file for your network from below
Step 2 : change the extension of .zip to .ipcc
Step 3 : Open iTunes and connect iPhone
Step 4 : To update the carrier hold down SHIFT key + update button in itunes
Step 5 : Browse to the .ipcc file that u have downloaded for your iphone and choose it
Step 6 : Uptake will take seconds and then when finished RESTART your iPhone
Step 7 : To go to MMS just choose the messaging app and to use tethering go to Settings >>>>> Networks
If you have downloaded the latest build of iTunes 8.2 v8.2.0.13 then uninstall it and then download the older build of itunes v 8.2.0.10 and update the carrier .ipcc file because the latest build of iTunes block using this method !!
One cool new feature of the 3.0 firmware is the ability to send more than one photo or screenshot (or any image that is on your iPhone or iPod Touch) at a time via email. The guide will show you how to quickly use Apple’s built in feature that allows you to email up to five image and how to email more then five images. This is a feature I LOVE and use all the time so, I thought I would make sure everyone knows how to use it! Below are step-by-step instructions. (thanks appleiphoneschool)
1. Open your stock Photos application.
2. Select your Camera Roll (thought this can be done with any images in your Photo Albums).
3. Select the mail icon in the lower left corner.
4. You will now see the options Share, Copy and Delete on a lower menu bar.
5. Tap on an image you would like to email. This will add a red check mark in the lower right corner of the image.
6. Tap on any additional images you would like to email.
Note: If you use the Share button, you can only choose 5 images however, if you would like to email more than five images, you can select Copy.
7. If you select the Share option, you can then select email and it will open an email with the images in the body of the email.
8. If you select the Copy option, you will then need to close your Pictures application (just tap the Home Button).
9. Open the Mail application and start a new email using the icon in the lower right corner.
10. Tap in the body of the message.
11. Select Paste.
12. All your images will then be pasted into the email.
13. Send email.
For iPhone OS 3.0 with jailbreak.
1. Download : com.apple.springboard.plist;
2. Unzip and then copy the .plist and connect with SSH and copy it to the folder /var/mobile/Library/Preferences (first backu the .plist);
3. Reboot de iPhone.
1. Go to Icy or Cydia
2. Uninstall dTunes
3. Launch your SSH or Diskaid program
4. Navigate to /var/mobile/Library
5. Modify the rights (permissions) to the Downloads folder to 777
6. Go to Icy
7. Reinstall dTunes
8. Reboot your iphone
9. Downloads will be working now.
Remember this will fix your download problems for all your programs needing to download a file: Safari
QuickTip - Silence and Send Calls to Voicemail using Power Button
When receiving an incoming call, you can quickly press the power button (that is the button on the top of your device) once to mute the ringing. Or, when receiving an incoming call, you can quickly press the power button twice and send the call straight to voicemail!
Just a quick, easy way to manage incoming phone calls. I guess Doug uses this option all the time. I personally tap the volume control button to mute an incoming calls. Who knew the iPhone was so multifaceted!
|
